Balboa

Balboa

Pololu Balboa Robot and Accessories

Balboa

Pololu Balboa Robot and Accessories

Subcategories

Active filters

  • CHF6.25

    This reflectance sensor module is designed specifically for use with the Balboa 32U4 balancing robot. It features five IR LED/phototransistor pairs that are great for identifying changes in reflectance on the ground directly underneath the Balboa (like detecting or following a black line on a white background). The sensor array offers dimmable brightness control, and each sensor provides an independent output that can be measured with a digital I/O.

  • CHF54.95

    This is the control board for the Balboa 32U4 robot. It is included as part of the Balboa 32U4 Balancing Robot Kit and can be added to the Balboa Chassis with Stability Conversion Kit to turn into a Balboa 32U4 robot.

  • CHF34.95

    This kit gives you the structural pieces you need to build your own Balboa chassis with stability conversion. The chassis includes an integrated battery holder that can be configured for 4 or 6 AA cells. Two configurable gearboxes further increase the gear ratio from the required micro metal gearmotors while supporting the weight of the robot with ball bearings rather than the gearmotor shafts themselves.

    The chassis works with a variety of wheel sizes and micro metal gearmotors, so wheels and motors are not included; choose your own wheels and motors to personalize your robot.

    Unlike the Balboa 32U4 Balancing Robot Kit, no electronics are included: this chassis is for those who want to supply their own custom electronics.

  • CHF9.95

    This accessory kit for the Balboa Chassis can be used for a variety of different applications, from a bumper cage for protecting your electronics to skids on which it can drive around to arms that you can mount sensors on.

    The parts for this kit are already included with the Balboa 32U4 Balancing Robot Kit.

  • CHF9.95

    With this accessory kit, you can convert your balancing Balboa chassis into a traditional differential-drive platform with a low-friction ball caster providing a stabilizing third point of contact.

    The parts for this kit are already included in the Balboa Chassis with Stability Conversion Kit.

  • CHF79.95

    Build your very own programmable balancing robot with the Balboa 32U4 robot kit! The Balboa control board features an Arduino-compatible ATmega32U4 MCU, motor drivers, quadrature encoders, and a full IMU. This board also has the ability to interface with a Raspberry Pi, making the foundation for a complete Raspberry Pi-controlled balancing robot.

    Motors and wheels are not included: choose your wheels and motors to personalize your robot.

  • CHF9.95

    This compact 8×2 LCD is great for small microcontroller projects where you want more than just a blinking LED for feedback. This unit uses the standard HD44780 parallel interface, features a black bezel, and operates without a backlight.